A Plumber In Coral Springs Explains The Use of Tape For Connections

Plumbing companies in Coral Springs recommend tape for threaded connections without built-in rubber seals. It lubricates the connection and makes threading smoother, besides preventing the pipes from getting stuck when disassembling the joints. Using the tape is quite easy, but it is necessary to know about the proper application. Some varieties of plumbers tape are: Teflon tape, PTFE or polytetrafluoroethylene. The tape provides a watertight seal when threaded at the joints of the pipe. To use the tape correctly wrap it around the joints in the appropriate direction. According to the experts from plumbing companies in Coral Springs, while turning the pipe in the fitting, friction between the mating threads tightens the tape around the pipes.

Plumber’s tape does not work against itself by unravelling or balling up. Wrap it around the pipes in the opposite direction of the turning of the pipe into the fitting. Before applying the tape, cleaning the male threads present at the end of the pipe using a clean rag. Now place one end of the tape on the second thread, starting from the pipe’s end. Holding it in place using a thumb or finger. The position of the tape should be flat instead of bunched up on the threads, extending to the pipe’s length perpendicularly.

The plumber in Coral Springs now start wrapping tapes around pipes in a direction opposite to the turning of the pipe. It is necessary to maintain enough tension on tape to make it wrap around pipes snugly. Work from one end of pipe to overlap tapes with each motion. You need 4-6 wraps of the tape around pipes and it finishes near end part of threads, at opposite part of the pipe. Now cut the tape from roll and grip this between the forefinger and thumb, pulling at it sharply. This will break easily.

Now, the plumber in Coral Springs smooths down the loose part over threads so that the pipe is ready for the fitting. Those familiar with the pipe-joint compound or pipe dope can use the tape for same applications. You can use this for the traditional metal pipes and the plastic rigid pipe. The common uses of the product are with the shower arms, pipe-to-coupling connections, showerheads, pipe-to-valve connections, and tub threaded spouts. You can use this for gas-pipe connections and this requires special tapes of yellow color rated for the gas lines. The term for the tape is the thread-sealing or thread seal.

The plumber in Coral Springs refer to the tape as plastic or metal strapping containing holes. The design is for supporting pipes. Different colors of the tape indicate the location of use with the yellow variety gas-rated. This has thicker walls to resist the gas. The yellow color indicates gas and color coordinating things and keeping them consistent helps with easy identification. For more information visit here: Christian’s Plumbing